Smoothening The Skin Color (Skin Detail Function) - JVC LST0904-001B Instruction Manual

Camera Features
Smoothening the Skin
Color (Skin Detail
Function)
The Skin Detail function can be used to reduce the contour
enhancement of video signals for only the skin areas so as to
produce a smoother skin tone.
Preparations Before Using the Skin Detail
Function (Skin Adjust Function)
1
Adjust the white balance. (A Page 40)
2
Display the [Skin Color Adjust] screen. (A Page 78)
● Select [Main Menu]B[Camera Process]B[Detail]/
[Adjust]B[Skin Color Adjust], and press the Set button
R
( ).
● The entire image switches to black-and-white display,
leaving only the detected skin areas in color.
Memo:
● The displays for [Bars], [Zebra], markers ([Aspect Marker]/
[Safety Zone]/[Center Mark]), [Focus Assist] mode, and
[B] mode in the [VF Display] menu are temporarily turned
Off .
Hue Range Detection
1
Project the detected object inside the skin color
detection frame.
2
Place the cursor at [Skin Color Detect] with the cross-
JK
shaped button ( ).
3
Press the Set button (
Display switches from Stop to Execute , and detection
starts.
Memo:
● Error is displayed if the object inside the frame is not
within the preset color range.
4
Press the Set button (
detected.
● If no Error is displayed, the data is saved and the
process ends.
● If Error appears, the process ends without saving the
data.
5
Place the cursor at [Back] after the hue range is
detected, and press the Set button (
Returns to the [Detail] menu screen.
Skin Color
Detection Frame
R
).
R
) after the desired hue range is
R
).
Color Range Setting
1
Place the cursor at [Skin Color Range] with the cross-
JK
shaped button ( ).
2
Press the Set button (
move the cursor to a setting value.
3
Select a setting value using the cross-shaped button
JK
( ), and press the Set button (
Select a setting within the [Narrow, -1 to -9, Normal, 9 to 1,
Wide] range.
4
Place the cursor at [Back] after setting is complete,
and press the Set button (
The data is saved, and the screen returns to the [Detail]
menu.
Using the Skin Detail Function
1
Set [Skin Detect] to On . (A Page 78)
● Select [Main Menu]B[Camera Process]B[Detail]/
[Adjust]B[Skin Detect] and set to On .
● S.DTL appears on the STATUS 0 and 1 Screens of the
LCD monitor and viewfinder when the Skin Detail function
is activated.
1280x720 30/24 fps
24p HQ
OK
A
100min
B 100min
STBY
282min
STATUS 1 Screen
2
Set the adjustment level for the contour enhancement
of the skin tone. (A Page 78)
Set using [Main Menu]B[Camera Process]B[Detail]/
[Adjust]B[Skin Color Detect]/[Level].
R
) or cross-shaped button (
2
R
).
R
).
S.DTL appears
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
SKIN AREA
S.DTL
B -3
ND1/16 A<3200K>
I
) to