Variable Frame Rec - JVC LST0904-001B Instruction Manual

Shooting
Special Recording
(continued)

Variable Frame REC

Shooting in this mode allows you to obtain smooth slow
motion or quick motion videos.
Using different frame rate settings for recording and
playback, videos captured at normal speed can be played
back more smoothly than those in low or high speed
playback.
To enable Variable Frame REC, the following two settings are
required at the same time.
● [Camera Resolution] in the [Record Format] menu is set
to 1280x720 .
● [Frame & Bit Rate] in the [Record Format] menu is set to
30p(HQ) , 24p(HQ) , or 25p(HQ) .
Number of Frames that can be Set
1
Set [Camera Resolution] to 1280x720 , then set
[Frame & Bit Rate]. (A Page 71)
Set [Frame & Bit Rate] to 30p(HQ) , 24p(HQ) , or
25p(HQ) .
2
Set [Rec Mode] to Variable Frame . (A Page 71)
Set [Main Menu]B[Record Set]B[Rec Mode] to Variable
Frame .
3
Select a recording frame rate from [Frame Rate].
(A Page 71)
The selectable frame rates are as shown below.
Record Format Selectable Shooting Frame Rate
1280x720 30p(HQ) 10 12
24p(HQ) ^ 10
25p(HQ) ^ ^
Effect during playback Quick motion
Memo:
● When [AE LEVEL] in the [Main Menu]B[Camera
Function]B[Switch Set] menu is set to AE LEVEL/VFR ,
you can use the cross-shaped button (
frame rate during Variable Frame REC. In modes other
than Variable Frame REC, the cross-shaped button (
functions as the [AE LEVEL] setting button. (A Page 75)
15 20 24 30 40 48
12 15 20 24 30 40
10 12.5 20 25 40 50
Standard Slow motion
H I
) to select the
Note:
● The recording frame rate cannot be changed during
recording. To change the frame rate, stop the recording
first and perform the change.
● When the [TC GENE.] switch located on the inner panel of
the LCD is set to FREE , videos are recorded in REC
(RecRun) time code.
● Audio cannot be recorded. A
level meter display. (A Page 96)
● Depending on the settings, images beyond the recording
stop position may be recorded and it may take time for the
camera recorder to enter STBY mode.
60 ^
48 60
^ ^
H I
)
mark appears in the audio