Auto White Display (Camera Mode Only, Excluding Aux Mode); Menu Setting Screen; Alarm Display; Zebra Pattern Display - JVC GY-HM790CHU Instructions Manual

Introduction
Displays on the LCD Monitor
and Viewfinder (continued)
Auto White Display (Camera Mode Only,
Excluding AUX Mode)
Displays the operation and result when Auto White Balance is
activated.
(A Page 42 [Adjusting the White Balance])

Menu Setting Screen

For configuring various settings.
Press the [MENU] button to display the menu setting screen.
(A Page 70 [Basic Operations in Menu Screen])
[Main Menu] Screen
20
Downloaded From VideoCamera-Manual.com Manuals

Alarm Display

● Alarm is displayed during the status screen display in
Camera mode (STATUS 0, 1, 4) and Media mode. If the
alarm sounds during STATUS 2 or 3 screen display in
Camera mode, the display will return to STATUS 0 screen
and alarm will be displayed.
(A Page 134 [Error Displays and Actions])
30/24 fps
A
1min
B 1min
F5.6
STBY RES
Alarm Display Area

Zebra Pattern Display

Two types of zebra patterns that indicate the luminance level
of the video image can be displayed on this camera recorder.
You can set the luminance levels for displaying the two types
of zebra patterns.
(A Page 54 [Setting Zebra Pattern])
Zebra Pattern
Memo :
● Use the [ZEBRA ON/OFF] switch in front to turn ON/OFF the
zebra pattern display.
● Set the display pattern and luminance level in [LCD/VF]
menu B [Shooting Assist] B [Zebra]. (A Page 89)
MAX 123%
MIN 45%
S.DTL
B -3
A<3200K>
AE+1 9dB 1/10000