Setting The Clock (Initial Setting) - JVC LST0904-001B Instruction Manual

Setting the Clock (Initial
Setting)
Set the date/time of the built-in clock in the [Initial Setting]
screen. The configured date/time data is saved in the built-in
rechargeable battery even if the power is turned off.
Setting the Clock in the [Initial Setting]
Screen
The [Initial Setting] screen appears when the power is turned
on for the first time and when the built-in battery is turned on
again after being fully discharged.
All operations are disabled until initial settings are complete.
1
Set the [POWER] switch to ON .
The [Initial Setting] screen appears.
For GY-HM700CHU/GY-HM700U
For GY-HM700CHE/GY-HM700E
[MENU] Button
Cross-Shaped
Button (JKH I),
Set button (R)
[POWER] Switch
2
Specify [Time Zone] and [Date/Time].
A
Move the cursor with the cross-shaped button (
select the setting item.
B
Change the values with the cross-shaped button (
3
Press the Set button (
The clock is set to 0 seconds of the input date/time.
Memo:
● The configured date/time data can be displayed on the
LCD monitor and viewfinder and be recorded to the SDHC
card.
● The value of the year can be set in the range of 2000 to
2099 .
Changing the Time after Initial Setting
Setting the date/time (A Page 88)
1
Select [Others]B[Date/Time].
The [Date/Time] setting screen appears.
2
Set the date and time.
A
Move the cursor with the cross-shaped button (
select the setting item.
B
Change the values with the cross-shaped button (
3
Press the Set button (
The clock is set to 0 seconds of the input date/time.
H I
R
) after setting is complete.
H I
R
) after setting is complete.
) and
JK
).
) and
JK
).