Side Control Panel - JVC LST0904-001B Instruction Manual

Introduction
Names of Parts (continued)

Side Control Panel

A
B
C
D
E
F
G
H
I
J
A
[VF BRIGHT] Viewfinder Luminance Adjustment Knob
(A Page 28)
B
[VF PEAKING] Contour Adjustment Knob (A Page 28)
Memo:
● This knob does not function when Focus Assist is
activated. (A Page 35)
C
[FOCUS ASSIST] Focus Assist Button
Press this button during shooting to display the focused area
in either blue, red, or green. This enables easy and accurate
focusing. (A Page 35)
D
[USER1], [USER2], [USER3] User Buttons (A Page 74)
Use these buttons to switch shooting conditions according to
the object. The functions change as below according to the
operation mode (A Page 7).
During Camera Mode
● Activates the function assigned
[USER1]
to [USER1] in the menu.
Button
● Loads the [TC Preset] screen
when pressed together with
the [MENU] button.
(A Page 48)
● Activates the function assigned
[USER2]
to [USER2] in the menu.
Button
● Resets settings on the [TC
Preset]/[UB Preset] screen
when pressed.
(A Page 48, 49)
● Activates the function assigned
[USER3]
to [USER3] in the menu.
Button
P
O
N
M
L
K
During Media Mode
Adds/deletes OK
mark.
(A Page 64)
Deletes clip.
(A Page 62)
^
Memo:
● Set the functions of the [USER1,USER2,USER3] buttons
in the menu. (A Page 74)
● When the menu screen is displayed, these buttons
function as the menu operation buttons.
(A Page 66 [Operation Buttons])
E
[MENU] Menu Button (A Page 66)
F
[ND FILTER] ND Filter Switch (A Page 43)
G
[STATUS] Status Screen Display Button
● Press the [STATUS] button to display the status screen on
the viewfinder and LCD monitor during normal screen
display (when the menu screen is not displayed).
(A Page 16 [Status Screen])
● Switches between [Main Menu] and [Favorites Menu]
when the [STATUS] button is pressed while the menu
screen is displayed. (A Page 66)
H
[GAIN] Sensitivity Selection Switch (A Page 37)
I
[WHT.BAL] White Balance Selection Switch
(A Page 40)
You can select one of the three white balance types.
J
[POWER] Power ON/OFF Switch
Turns ON/OFF the power.
When the power is OFF, POFF appears on the LCD
monitor and viewfinder.
Wait for 5 seconds or more to turn on the power again.
K
[REC] REC Trigger Button (Recording Start/Stop)
Starts/stops recording.
The [REC] trigger button (A Page 9) Z on top and the [REC]
trigger button (A Page 14) of the lens are interlocked with
this button.
Memo:
● When [1394 Rec Trigger] in the [Others] menu is set to
Split , this button becomes the recording start/stop
button of the external equipment. (A Page 88)
(A Page 116 [Backup Recording])
L
[AUDIO LEVEL CH-1/CH-2]/[AUTO] CH-1/CH-2
Recording Level Adjustment Knob/Auto Indicator
(A Page 44)
M
[CANCEL] Cancel Button
Cancels various settings and stops playback.
N
Cross-Shaped Button (
The function changes according to the operation status of
the camera recorder.
During menu operation (all modes) (A Page 66)
Center Set button ( R )
Cross-shaped button (
During Camera mode
Shutter operation:
R
Center Set button ( )
Cross-shaped button (
AE level operation :Cross-shaped button (
JKH I )/Set Button (
: Confirms menu items and
setting values
JK ) : Selects menu items and
setting values
: Shutter ON/OFF
JK
) : Switches shutter speed when
shutter is ON
H I
)
R )