Camera Features
Marker and Safety Zone
Displays (Camera Mode
Only)
The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the
shooting purpose.
Example of display when [Aspect Ratio] = 4:3 , [Aspect Marker] = Line+Halftone , and [Center Mark] = On
Safety Zone
You can turn ON/OFF the safety zone and center mark displays as shown below using the [Aspect Ratio], [Safety Zone] and
[Center Mark] settings of [Marker Setting] in the [LCD/VF] menu. (A Page 84)
[Aspect Marker] Display
When [Aspect Ratio] = 4:3
[Line]
[Aspect Marker] Display for Different
[Aspect Ratio] Settings
When [Aspect Marker] = Halftone
[4:3]
[1.85:1 Center]
[14:9]
* [Aspect Marker] cannot
be set. (Fixed at Off )
[1.85:1C.HeadRM]
Center Mark
Aspect Marker
[Halftone]
[16:9]/[16:9(+4:3)]
[1.66:1]
[Line+Halftone]
[2.35:1 Center]
[2.35:1C.HeadRM]
[1.75:1]