Panasonic WJ-ND200K Setup Instructions page 79

Symptom
The buttons on the browser
are displayed out of align-
ment.
Some contents are not dis-
played on the browser.
The image is not being
refreshed.
Live/recorded images in
MPEG-4 format are not dis-
played in a normal manner.
Audio is not recorded
Audio is not be played cor-
rectly
No SD memory data is dis-
played in the recording
event list.
Cannot play SD memory
data.
Cause/solution
• The buttons may not be displayed orderly if the font
setting of Windows has been changed from the
default setting.
Use with the default font setting.
• Reload the contents by pressing the [F5] key.
• Depending on the traffic of the network, there might
be difficulties in displaying images. Press the [F5] but-
ton on the keyboard to request images.
• Images recorded at low recording rate (less than 1
ips) may sometimes not be refreshed.
• When turning on the power of this unit or when con-
necting the LAN cable to the network port when the
camera is active, images may not be displayed/
recorded in a normal manner for around a minute (at
a maximum) just after turning on the power of this unit
or after connecting the LAN cable to the network port.
• Is "Mic input" selected for "Audio mode" on the setup
menu of the network camera?
• Is "32 kbps" selected for "Audio bit rate" on the setup
menu of the network camera?
Check the settings of the camera.
• It is impossible to play SD memory data from the
recording event list or time and date search result.
After filtering by "SD memory" in the recording event
list, select an event to play it.
• The recording time of SD memory data will be dis-
played based on the clock of the camera. Check the
clock of the camera.
• When the SD memory data contains not many
frames, playback sometimes may not be performed in
a normal manner.
In this case, display the image with frame playback/
reverse frame playback.
Reference
pages
–
–
–
–
–
–
–
–
–
79