Panasonic WJ-ND200K Setup Instructions page 51

Perform the settings of the registered cameras independently
Screenshot 1
Click the [Camera] button in the "Setup" panel and then
click the "NW Camera Setup" tab. The "NW Camera
Setup" page will be displayed.
Step 1
The following settings of the registered cameras will be
displayed.
I CAM
It is possible to rearrange the order of the cameras.
When it is necessary to rearrange the displayed order of
the cameras after registering the detected cameras
using the [Search] button of "Camera Search", select a
number of the camera to rearrange the order.
Click the [SET] button after completing the camera
order arrangement.
Important:
When the order of the cameras is rearranged, the
order of the cameras (CAM) for the following setup
items will automatically be rearranged.
• "Emergency REC" – "Emergency REC"
• "Schedule" – "Program Setup"
• "Maintenance" – "Network Information"
I Thumbnail
Thumbnail image from each camera will be displayed.
Note:
When failed to connect to the camera, the reason
why the connection failed will be displayed such as
the following.
CONNECT ERROR: Communication with the cam-
era cannot be established
ATTEST ERROR: User authentication of the cam-
era failed
DNS ERROR: DNS server cannot resolve the cam-
era address
CAMERA ERROR: Illegal response from the cam-
era
PROXY (CONNECT) ERROR: Cannot connect to
the proxy server
PROXY (DNS) ERROR: Cannot resolve the proxy
server address
PROXY (CAMERA) ERROR: Illegal response from
the proxy server
I Information
Manufacturer, model/ compression method, address,
group title and camera title will be displayed.
Step 2
Click the [SETUP] button of the camera whose settings
are to be edited.
Note:
When a registered camera is disconnected, the
message "CONNECT ERROR" will be displayed in
the thumbnail image. When the disconnected cam-
era is not supposed to be connected again, select
"--" for "MODEL/COMPRESSION" of the setup
menu ("Camera" – "NW Camera Setup" – "MODEL/
COMPRESSION") for the disconnected camera.
51