Panasonic WJ-ND400/1000 Quick Reference Manual

ND400_A3_E.fm 1 ページ ２００８年４月８日 火曜日 午後２時５９分
Play back Recorded Images
Play back recorded images.
Select the camera channel you want to Plays back recorded images. [
playback and click the [PLAY] button. displayed in the status display area.
• Playback resumes from the date and
time when playback was stopped.
Click the [STOP] button to stop [ ] disappears from the Status
playback. display area and a live image from the
camera is displayed in the Image
display.
Click the [Go to date] button in the This displays the [Go to date] window.
Playback point operation area.
Select the date and time of the image to [ ] is displayed in the status display
play back and then click the [PLAY] area and images at the specified date
button. and time are played back.
Control the playback of recorded images from the [HDD] tab.
(1) [FF]/ : Plays recorded images forward or in reverse at
[REW] high speed.
The playback speed changes each time the
button is clicked.
(Approximately 4x 8x 16x
32x 48x 96x)
(2) [NEXT : Skips forward or backward to play the recorded
RECORD]/ image of the next event.
[PREV
RECORD]
(3) [NEXT : Click during playback or when paused to play
IMAGE]/[PREV one frame at a time forward or backward, or to
IMAGE] pause.
Search for and Playback Images
Search for and play back recorded events (REC event search).
Click the [Control] button and then click [Search] button in the
[Search] box.
• This will display the [Select search method] screen.
Click the [Rec event search] button.
• This displays the [Rec event search] window.
Narrow the conditions.
Select the "Time & date", "Rec event", and "Camera" for the
images you want to playback and then click the [OK] button.
• [FILTERING] is displayed on the status display area and the
filtered results are displayed on the recorded event list
window.
• Click the [All List] button to eliminate all the search conditions.
Click the recorded event time you want to play back. The
selected images are played back.
Click the [STOP] button to stop playback.
] is
Playback point
operation area
[HDD] Tab
(1)
(2)
(3)
(1)
(2)
(4)
(3)
3TU001890AAA
AM0408-0
Network Disk Recorder
WJ-ND400
The Quick Reference Guide provides simple explanations for operating the product.
Network Settings
Set the IP address, subnet mask, and other network settings for each port.
Factory default network settings
LCD
PT#1
Item
Camera port
DHCP -
IP address 192.168.0.250
Subnet 255.255.255.0
mask
Gateway -
HTTP -
ESC button
SET button
Arrow buttons
IP Address Settings How to configure network settings
Screen
Use the arrow buttons (up or down) on the
date display screen to display the [IP
Address Setup] and then press the [SET]
button.
• The cursor is shown as an under bar
[SET]
(_).
Click the [SET] button when the cursor is
[>].
Move the cursor with the arrow buttons
(left or right) to configure the settings.
Press the [ESC] button to move the cursor
to ">" and check the settings.
Press the [ESC] button again to return to
the date display screen.
Display the Operating Window
Display the operating window from a web browser on a PC.
Launch the web browser, input the main The authentication screen opens.
unit's IP address, and press the [Enter]
key.
Enter your user name and password to This will display the top page.
login. • The wizard for installing ActiveX
• Initial default control, which is required to display
User name: ADMIN images from cameras, opens. Follow
Password: 12345 the instructions of the wizard.

Quick Reference Guide

PT#2 PT#3
Client PC port Maintenance port
OFF -
192.168.1.250 192.168.2.250
255.255.255.0 255.255.255.0
192.168.1.1 -
80 -
Switch to the settings screen.
• When the cursor changes to ">":
Arrow buttons (left or right): Select port
Arrow buttons (up or down): Select item
The cursor moves to the number area.
• Arrow buttons (left or right): Move the
cursor
• Arrow buttons (up or down): Input a
value