Panasonic WJ-ND200K Setup Instructions page 49

• When the [Execute] button of "Start IP Address" is
clicked, the unit will automatically find an unused IP
address and set it to the detected camera. However,
depending on the network environment, the set IP
address may be already used for the other network
device such as when using the firewall function of
®
Windows .
In this case, check the IP address setting and regis-
ter the other IP address for the camera manually.
When a message saying there is no available IP
address is displayed, check and arrange the IP
address settings to manually register an unused IP
address to the camera.
• "Start IP Address" is available only when "OFF" is
set for the DHCP settings of the unit.
Register the IP addresses of the cameras manually
Screenshot 1
Click the [Camera] button in the "Setup" panel and then
click the "NW Camera Setup" tab. The "NW Camera
Setup" page will be displayed.
Step 1
Click the [Setup] button of "Network Camera
Registration".
49