Panasonic WJ-ND200K Setup Instructions page 68

SEQ: Images will be displayed in the sequential display.
The operational settings of the sequential display
can be performed on the "Sequence Setup" window
("Camera" - "Sequence Setup").
I Camera Partitioning
Select a controllable range for each camera channel
from the following.
View/Operate: Both displaying live/recorded images
and controlling cameras are possible.
View: Displaying live/recorded images is possible.
Controlling cameras is impossible.
--: Neither displaying live/recorded images nor control-
ling cameras are possible.
Registration of a PC (host) accessible to this unit and edit/delete the registered host
information [Host Setup]
Register information of a PC (host) that accesses this unit via a network such as a LAN.
Up to 32 hosts can be registered.
Screenshot 1
Click the [User Mng.] button in the "Setup" panel and
then click the "Host Setup" tab. The "Host Setup" page
will be displayed.
68
I User Edit/Delete
Edit or delete registered user information.
Click the [i] button to select the desired user informa-
tion to be edited or deleted. It is necessary to click the
[SET] button after editing/deleting the selected user
information.
• To edit the selected user information
Click the [EDIT] button to edit the selected user
information. The editing window will be displayed
with information of the registered user. Edit user
information in the same way as the user registration.
( page 67)
• To delete the selected user
Click the [DELETE] button to delete the selected
user.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [Registration] button after completing the set-
tings.
Step 3
Click the [SET] button to apply the settings.