Panasonic WJ-ND200K Setup Instructions page 69

Setup items
I Host IP Address
Enter an IP address. Enter 4 units from the decimal
numbers (0-254).
Notes:
• Entering "*" validates all numbers.
• It is impossible to register "0.0.0.0" or "*.*.*.*".
I Level
Select a user level from the following. Operable func-
tions for each level can be set in the "User Level" menu
( page 70).
LV1/LV2/LV3/LV4
I Priority
Assign a priority from 1 (lowest priority) to 16 (highest
priority) to every host.
I Default Screen
Select a startup display to be displayed after login from
the following.
CAM1 - 16: Displays live images from the selected cam-
era channel on a single screen.
4A - 4D: Images of the camera group (4A - 4D) consist-
ed in advance from 4 camera channels will be dis-
played on a 4-Screen.
The settings for 4-Screen can be configured on the
"Monitor Display" page ("System" – "Basic Setup" –
"Monitor Display" ( page 30).
SEQ: Images will be displayed in the sequential display.
The operational settings of the sequential display
can be performed on the "Sequence Setup" window
("Camera" - "Sequence Setup").
I Camera Partitioning
Select a controllable range for each camera channel
from the following.
View/Operate: Both displaying live/recorded images
and controlling cameras are possible.
View: Displaying live/recorded images is possible.
Controlling cameras is impossible.
--: Neither displaying live/recorded images nor control-
ling cameras are possible.
I Host Edit/Delete
Edit or delete registered host information.
Click the [i] button to select the desired host informa-
tion to be edited or deleted.
It is necessary to click the [SET] button after editing/
deleting the selected host information.
• To edit the selected host information
Click the [EDIT] button to edit the selected host
information. The editing window will be displayed
with information of the registered host. Edit host
information in the same way as the host registration.
( page 68)
• To delete the registered host IP address
Click the [DELETE] button to delete the selected
host IP address.
Important:
It is necessary to click the [SET] button to apply the
settings after registering a host or after editing/delet-
ing the host information.
Note:
Even when the [Registration] button is clicked, other
hosts will not forcibly be logged out.
69