Panasonic WJ-ND200K Setup Instructions page 23

Setup items
Comm
Basic Setup
DDNS Setup
Proxy Setup
SNMP Setup
NTP Setup
FTP Setup
Mail Setup
Panasonic Alarm protocol
User Mng.
Basic Setup
Administrator Setup
User Setup
Host Setup
User Level
Description
Perform the settings for a network. Settings for a network con-
nection such as settings of the IP address and gateway address
can be performed.
Perform the basic settings of network DDNS.
Determine to enable or disable DDNS, or perform the settings of
the user IDs.
Perform the basic network proxy settings.
Determine whether or not to use the proxy server, and perform
the settings such as the server address settings, etc.
Perform the settings for the SNMP. By connecting to the SNMP
manager, the status check of the unit can be checked.
Perform the settings when adjustment of the time is required to
be set with the NTP server such as when setting the NTP server
address.
Perform the settings for the FTP server. Settings for transmitting
images from a camera connected to this unit to a designated
FTP server periodically can be performed with the "FTP Setup"
menu.
Perform the settings to send e-mails to addresses registered in
advance at an event or error occurrence.
It is possible to send a message to addresses registered in
advance using "Panasonic Alarm Protocol" when an event or a
problem occurs.
Determine whether to enable or disable the user authentication
and the host authentication.
Edit information of the registered administrators such as the
administrator name, password, the default screen, etc.
Register users who can operate the unit and edit/delete the reg-
istered user information.
User name, password and operational level can be set.
Register hosts (PCs) that can access the unit via a network and
edit/delete the registered host information.
Operational levels and IP addresses of PCs can be set.
Functions operable in each user level can be set.
Page
55
57
58
59
60
61
63
64
65
66
67
68
70
23