Speaker - HP EliteDesk 705 G1 Microtower Maintenance And Service Manual

NOTE: After installing a new processor onto the system board, update the system ROM to ensure
that the latest version of the BIOS is being used on the computer. The latest system BIOS can be
found on the Web at: http://h18000.www1.hp.com/support/files.

Speaker

1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the speaker cable from the clip on the base pan.
4. Disconnect the speaker wire from the system board connector labeled SPKR (1).
5. From the inside of the chassis, remove the silver Torx T15 screw (2) that secures the speaker to
the chassis.
(Preparation for disassembly on page
(Access panel on page 33).
32).
Speaker 57