Creating Recovery Media; Creating Recovery Media Using Hp Recovery Manager (Select Models Only) - HP EliteDesk 705 G1 Microtower Maintenance And Service Manual

1. After you successfully set up the computer, create recovery media. This media can be used to
reinstall the original operating system in cases where the hard drive is corrupted or has been
replaced. See
2. As you add hardware and software programs, create system restore points. A system restore
point is a snapshot of certain hard drive contents saved by Windows System Restore at a
specific time. A system restore point contains information that Windows uses, such as registry
settings. Windows creates a system restore point for you automatically during a Windows update
and during other system maintenance (such as a software update, security scanning, or system
diagnostics). You can also manually create a system restore point at any time. For more
information and steps for creating specific system restore points, see Help and Support. To
access Help and Support, select Start > Help and Support.
3. As you add photos, video, music, and other personal files, create a backup of your personal
information. If files are accidentally deleted from the hard drive and they can no longer be
restored from the Recycle Bin, or if files become corrupted, you can restore the files that you
backed up. In case of system failure, you can use the backup files to restore the contents of your
computer. See
NOTE: HP recommends that you print the recovery procedures and save them for later use, in case
of system instability.

Creating recovery media

After you successfully set up the computer, create recovery media. The media can be used to
reinstall the original operating system in cases where the hard drive is corrupted or has been
replaced.
There are two types of recovery media. To determine which steps to follow for your computer:
1. Click the Start button.
2. Click All Programs.
If Security and Protection is listed, continue with the steps in
●
HP Recovery Manager (select models only) on page
If Productivity and Tools is listed, continue with the steps in
●
Recovery Disc Creator (select models only) on page

Creating recovery media using HP Recovery Manager (select models only)

To create recovery discs, your computer must have a DVD writer. Use DVD+R or DVD-R discs
●
(purchased separately). The discs you use will depend on the type of optical drive you are using.
NOTE:
You have the option of creating a recovery USB flash drive instead, using a high-quality USB
●
drive.
If you are creating recovery discs, be sure to use high-quality discs. It is normal for the system to
●
reject defective discs. You will be prompted to insert a new blank disc to try again.
The number of discs in the recovery-disc set depends on your computer model (typically 3 to 6
●
DVDs). The Recovery Media Creation program tells you the specific number of blank discs
needed to make the set. If you are using a USB flash drive, the program will tell you the size of
the drive required to store all the data (minimum of 8 GB).
Creating recovery media on page
Backing up your information on page
DVD+R DL, DVD-R DL, or DVD±RW disc are not supported.
175.
177.
175.
176.
Backing up, restoring, and recovering in Windows 7 175
Creating recovery media using
Creating recovery discs with HP