Removing A Slim Optical Drive - HP EliteDesk 705 G1 Microtower Maintenance And Service Manual

Hp elitedesk 705 g1 microtower/ small form factor
Hide thumbs Also See for EliteDesk 705 G1 Microtower:
Table of Contents

Advertisement

Removing a slim optical drive

CAUTION:
computer.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the power cable (1) and data cable (2) from the rear of the optical drive, push the
green release latch on the right rear side of the drive toward the center of the drive (3), then slide
the drive forward and out of the bay through the front bezel (4).
CAUTION:
avoid damaging the cable.
84
Chapter 6 Removal and replacement procedures – small form factor (SFF) chassis
All removable media should be taken out of a drive before removing the drive from the
(Access panel on page
When removing the cables, pull the tab or connector instead of the cable itself to
(Preparation for disassembly on page
67).
66).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elitedesk 705 g1 small form factor

Table of Contents