Appendix C Statement Of Volatility - HP EliteDesk 705 G1 Microtower Maintenance And Service Manual

C Statement of Volatility
HP confirms that AMD-based business desktop HP EliteDesk 705 G1 Microtower and Small Form
Factor systems contain DDR3 volatile memory (memory amount depends on the customer
configuration). In addition, the motherboard in the condition originally shipped without subsequent
modification or the addition or installation of any applications, features, or functionality, contain the
following nonvolatile memory: Real Time Clock battery backed-up configuration memory (256 Bytes),
DIMM Serial Presence Detect (SPD) configuration data (256 Bytes per module, 128 Bytes
programmable), Serial Peripheral Interface (SPI) ROM for System BIOS (8M Bytes) and Super I/O's:
masked keyboard ROM (overall 2K Bytes). In addition, these units contain a Trusted Platform Module
(TPM) that contains 16K Bytes of non-volatile memory for user data. The volatile memory will not hold
any user data once power has been removed for 30 seconds or longer.
The following procedure shows the steps that should be taken to restore the Non-Volatile memory
found in the Intel-based HP ProDesk 705 G1 systems:
1. Download the latest BIOS (system ROM) from the HP website.
2. Follow the instructions to flash the BIOS that are found on the website.
Flashing the BIOS will reset it back to factory settings.
3. Turn on the system, and while system is powering on, and after the HP splash screen, press the
F10 key to enter BIOS setup screen.
4. Select Security > System Security from the main menu. If the Embedded Security Device
Support option is set to "Disable", skip to step 7.
5. To erase all security keys from the TPM:
Under Embedded Security Device in the System Security menu, configure Reset to Factory
Settings to Reset.
NOTE:
may not be. Data stored in these indices should not contain security sensitive information. If an
application locks down and secures the non-volatile indices, these indices cannot be cleared.
6. Press F10
7. To clear the secure boot key database:
a. Enter the F10 setup utility.
b. Go to the Security menu.
c. Select Secure Boot Configuration.
d. In the Key Management section, select clear Secure boot keys.
e. Use space key to select clear.
f. Press the
g. From the main menu select File > Save Changes and Exit.
8. If the Ownership Tag or Asset Tag is set, manually clear it under Security > System Ids.
9. Select File > Save Changes and Exit.
Although the TPM security keys will be cleared, data in the non-volatile memory indices
to accept changes.
F10 key to accept changes.
187