Speaker - HP EliteDesk 705 G3 Desktop Mini Maintenance And Service Manual

Speaker

A single speaker is located on the left side of the computer behind the front bezel, inside the chassis. It is
secured by a white peg that you pull out to release.
To remove the speaker:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Disconnect the speaker cable from the system board connector (1).
4. From the front of the computer, pull to remove the white peg that secures the speaker (2).
5. Lift to remove the speaker from the computer.
To install the speaker, reverse the removal procedures.
22 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Preparation for disassembly on page
(Access panel on page 19).
18).