System Restore; System Recovery; System Recovery When Windows Is Responding - HP EliteDesk 705 G1 Microtower Maintenance And Service Manual

System Restore

If you have a problem that might be due to software that you installed on your computer, or if you
want to restore the system to a previous state without losing any personal information, use System
Restore to return the computer to a previous restore point.
NOTE: Always use this System Restore procedure before you use the System Recovery feature.
To start System Restore:
1. Close all open programs.
2. Click the Start button, right-click Computer, and then click Properties.
3. Click System protection, System Restore, click Next, and then follow the on-screen instructions.

System Recovery

WARNING!
back up all user information so you can restore it after recovery.
System Recovery completely erases and reformats the hard disk drive, deleting all data files that you
have created, and then reinstalls the operating system, programs, and drivers. However, you must
reinstall any software that was not installed on the computer at the factory. This includes software that
came on media included in the computer accessory box, and any software programs you installed
after purchase. Any personal files must be restored from backups you made.
If you were not able to create system recovery DVDs or USB flash drive, you can order a recovery
disc set from support. Go to http://www.hp.com/support, select your country or region, and follow the
on-screen instructions.
NOTE: Always use the System Restore procedure before you use the System Recovery program.
See System Restore on page
You must choose one of the following methods to perform a System Recovery:
Recovery image — Run System Recovery from a recovery image stored on your hard disk drive.
●
The recovery image is a file that contains a copy of the original factory-shipped software. To
perform a System Recovery from a recovery image, see
responding on page 178
Recovery media — Run System Recovery from recovery media that you have created from files
●
stored on your hard disk drive or purchased separately. See
media (select models only) on page

System Recovery when Windows is responding

CAUTION:
begin, back up any important data to a CD or DVD or to a USB flash drive.
NOTE: In some cases, you must use recovery media for this procedure. If you have not already
created this media, follow the instructions in
If the computer is working and Windows 7 is responding, use these steps to perform a System
Recovery:
1. Turn off the computer.
2. Disconnect all peripheral devices from the computer except the monitor, keyboard, and mouse.
3. Turn on the computer.
178 Chapter 12 System backup and recovery
This procedure will delete all user information. To prevent loss of information, be sure to
178.
or System Recovery when Windows is not responding on page
System Recovery deletes all data and programs you created or installed. Before you
System Recovery when Windows is
179.
Creating recovery media on page
System Recovery using recovery
175.
179.