I-Series Indoor Gas Fireplace
4). Remove 3 screws that hold the Firebox Baffle in location.
Figure 52 Sec.10
5). The Firebox Baffle can be lowered at the front and then pulled
forward away from 2 studs that secure the rear.
Figure 53 Sec.10
6). Remove the 4 screws that secure the bypass plate to the
bottom of the Heat Exchanger.
CAUTION: Screws may be tight. Use DW40 to help reduce the
risk of screws stripping or breaking heads.
Figure 54 Sec.10
Page 56
Maintenance
7). Once the Restrictor has been removed, it is important that you
return the screws to their locations again.
Figure 55 Sec.10
8). Re-install the Firebox Baffle, left and right Upper Firebox Panel
Retainers, Firebox Panels and Burner assembly and door.
XG0514-092314