I-Series Indoor Gas Fireplace
6). Cut the Zip Strap holding the Fan Wire Harness.
Figure 39 Sec.10
7). Cut the Zip Strap that holds the Fan Wire Harness in the Valve
Compartment.
Figure 40 Sec.10
8). Disconnect the Fan Wire Harness.
Figure 38 Sec.10
Page 52
Maintenance
9). Disconnect the Fan Wire Harness at the back as well.
Figure 41 Sec.10
10). Remove 3 screws that mount each fan in place.
Figure 42 Sec.10
11). Remove the Blowers from the Fireplace.
Figure 43 Sec.10
XG0514-092314