Montigo 30FID Installation & Maintenance Manual page 21

22). Connect the unit to the gas and electrical supply.
23). Before concluding the conversion, make sure you leak test
the entire system and check all operational functions to ensure
that the unit is performing safely and properly.
24). Fill out required information on LP conversion label.
Figure 21 Sec.6
25). Remove rating plate from under appliance and turn it over
to the blank side.
Figure 22 Sec.6
XG0513-092314
Installation
26). Apply sticker to blank side. Put rating plate back.
Figure 23 Sec.6
I-Series Indoor Gas Fireplace
Page 21