Remote Operation - Montigo 30FID Installation & Maintenance Manual

I-Series Indoor Gas Fireplace

Remote Operation

The Proflame 2 System consists of the following elements:
1. Pilot Assembly
2. Proflame Gas Valve.
3. Proflame 2 Control Module
4. Wiring Harness
5. Variable Speed fans
6. Variable Accent Lights
7. Proflame 2 remote control
8. Battery Pack
9 Manual override switch
NOTE: Can not be used with home automation systems.
The Proflame 2 Transmitter controls the following fireplace
functions:
1. Main Burner On/Off
2. Main Burner flame modulation (6 levels).
3. Choice of standing or intermittent pilot (CPI/IPI).
4. Thermostat and Smart thermostat functions.
5. Variable Accent light (6 Levels).
6. Fan speed modulation (6 levels).
The Proflame 2 Transmitter uses a streamline design with a
simple button layout and informative LCD display, see figure
22. A Mode Key is provided to index between the features
and a Thermostat Key is used to turn On/Off or index through
Thermostat functions, see figure 25 & 27. Additionally, a Key
Lock feature is provided, see figure 39.
WARNING
Do not expose remote control to temperatures below 0°C (32°F) or above 50°C (122°F)
CAUTION
Property Damage Hazard. Excessive heat can cause property damage.
The appliance can stay lit for many hours. Turn off the appliance if it is not going
be attended for any length of time.
Page 42
Operation
.
.
Figure 8 Sec.10
Proflame 2 Remote Control
SW1
LED1
LED2
SW1 = Programing Button
LED1 = Red Diagnostic Light
LED2 = Amber Programing Remote Control Light
Figure 9 Sec.10
Proflame 2 Control Module
Fans
Figure 10 Sec.10
Remote Control LCD display.
Blue Back lit LCD display
On/Off Key
Thermostat Key
Up/Down Arrow Key
Mode Key
Not Used
Accent lights
XG0513-092314