Juniper J-series Services Router J2320 Getting Started Manual page 204

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
Figure 77: Removing the J2320 or J2350 Internal Compact Flash
9.
10.
Figure 78: Inserting the J2320 or J2350 Internal Compact Flash
11.
12.
13.
14.
15.
16.
182
Replacing Internal Compact Flashes on J2320 and J2350 Routers
Place the compact flash on the antistatic mat or in the electrostatic bag.
With the vendor name and memory size facing up and the arrow pointing towards
the router, insert the new compact flash into the compact flash slot (see
Figure 78 on page 182).
Replace the compact flash slot cover.
Tighten the pan head screws that secure the compact flash slot cover.
Slide the chassis cover onto the chassis.
Replace the chassis cover. (See "Removing and Replacing the Chassis Cover on
J2320 and J2350 Routers" on page 178.)
Replace the power cable.
Press and release the power button to power on the router. Verify that the
LED lights steadily.
POWER