Configuring Secure Web Access With A Configuration Editor - Juniper J-series Services Router J2320 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
Table 59: Secure Access Quick Configuration Summary (continued)
Field Function
Enable HTTPS on All Enables HTTPS on all interfaces at one
Interfaces time.
HTTPS-Enabled Allows you to specify interfaces on which
Interfaces you want to enable HTTPS access.
JUNOScript over SSL
Enable SSL JUNOScript Enables secured SSL access to the
access JUNOScript XML scripting API.
JUNOScript SSL Specifies SSL certificates to be used for
Certificate encryption.
This field is available only after you create
at least one SSL certificate.

Configuring Secure Web Access with a Configuration Editor

You can manage your Services Router using a secure Web connection by enabling
HTTPS.
To enable HTTPS on your Services Router:
1.
2.
3.
4.
Table 60: Configuring a Secure Web Access
Task
Navigate to the Security
level in the configuration
hierarchy.
156
Configuring Secure Web Access with a Configuration Editor
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 60 on page 156.
If you are finished configuring the router, commit the configuration.
To check the configuration, see "Verifying Secure Web Access" on page 157.
J-Web Configuration Editor
1. In the J-Web interface, select
Configuration>View and Edit>Edit
Configuration.
2. Next to Security, click Configure or Edit.
Your Action
To enable HTTPS on all interfaces, select the Enable
HTTPS on All Interfaces check box.
Select and deselect interfaces by clicking the direction
arrows:
To enable HTTPS access on an interface, add the
interface to the HTTPS Interfaces list.
To disable HTTPS access on an interface, add the
interface to the Logical Interfaces list.
To enable SSL access, select the Enable SSL JUNOScript
access check box.
To enable an SSL certificate, select a certificate from
the JUNOScript SSL Certificate list—for example, new.
CLI Configuration Editor
From the hierarchy level, enter
[edit]
edit security