Table of Contents
Advertisement
2. Use the PTZ directional buttons to move the camera to the desired position.
3. Click
to finish the setting of the current preset.
4. You can click
To call a preset:
1. Select a defined preset from the list.
2. Click
to call the preset.
Using preset tours
A preset tour is a memorized series of preset function. The camera stays at a step for a
set dwell time before moving on to the next step. The steps are defined by presets. A
preset tour can be configured with up to 32 presets.
You can configure up to eight preset tours.
To set a preset tour:
1. In the PTZ control panel, click
2. Select a preset tour number from the drop-down list.
3. Click
to enter the adding interface of preset.
4. Configure the preset number, preset tour duration, and preset tour speed.
Preset Tour Duration
Preset Tour Speed
5.
Click
OK
to save a preset into the preset
6.
Repeat the steps from 3 to 5 to add more
7.
Click
to save all the preset tour
TruVision 360° Camera Configuration Manual
to delete the preset.
to enter the tour settings interface.
The dwell time. The length of time in seconds for which a
camera stays at a preset before moving to the next preset.
The speed the camera moves from one preset to another.
settings.
tour.
presets.
45
Advertisement
Table of Contents
