Table of Contents
Advertisement
as 5 seconds, the camera records until 11:00:05. The post-record time can be
configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min.
To set up a recording schedule:
1. Click
Configuration
2. Click the
Enable Record Schedule
Note:
To disable recording, deselect the option.
3. Click
Edit
to edit the recording schedule. The following window appears:
4. Select whether the recording will be for the whole week
specific days of the week.
If you have selected "All day", select one of the record types to record from the drop-
down list box:
•
Normal: This is continuous recording.
•
Motion detection: The video is recorded when the motion is detected.
•
Alarm: The video is recorded when the alarm is triggered via the external alarm
input.
•
Motion | Alarm: The video is recorded when the external alarm is triggered or
the motion is detected.
•
Motion & Alarm: The video is recorded when motion and alarms are triggered
at the same time.
5. If you selected "Customize", click the day of the week required and then for period 1
set the start and end times during which you want the camera to begin and end
recording.
From the drop-down list box, select one of the record types to record.
Repeat for additional periods in the day. Up to eight time periods can be selected.
Note: The eight time periods cannot overlap.
6. Set the recording periods for the other days of the week if required.
TruVision 360° Camera Configuration Manual
>
Storage
>
Record
box to enable recording.
Schedule.
(All Day
recording) or for
31
Advertisement
Table of Contents
