Table of Contents
Advertisement
8. Select a display mode for the camera from the
modes include:
•
Transparent & Not
•
Transparent & Flashing. The image appears through the text. The text flashes
on and off.
•
Not transparent & Not
•
Not transparent &
and off.
9. Select the
OSD size
10. Click
Save
to save changes.
Note: If you set the display mode as transparent, the text varies according the scenery.
With some scenes, the text may be not clear.
Configuring privacy mask
Privacy masks let you conceal sensitive areas (such as neighboring buildings) to
protect them from view on the monitor screen and in the recorded video. The masking
appears as a blank area on screen. You can create up to four privacy masks per
camera.
Figure 10: Privacy mask menu
To add privacy mask area:
1. Click
Configuration
2. Check the
Enable Privacy
3. Click
Draw
Area.
TruVision 360° Camera Configuration Manual
flashing. The image appears through the text.
flashing. The image is behind the text. This is default.
Flashing. The image is behind the text. The text flashes on
that you want.
>
Image
>
Privacy
Mask.
Display Mode
Mask.
list box. Display
23
Advertisement
Table of Contents
