Interlogix TruVision 360° Configuration Manual page 23

Parameter
Sensitivity
Filtering Time
Smart IR
IR Light
4. Backlight Settings
BLC Area
WDR
5. White Balance
White Balance
6. Image Enhancement
Digital Noise Reduction
Noise Reduction Level
Time/Space DNR Level
TruVision 360° Camera Configuration Manual
Description
If you choose Auto Day/Night switch, you can choose the sensitivity
value from 0 to 7. The higher the value, the easier it is for the mode to
switch.
Only available when Auto D/N switch mode is selected. The filtering time
refers to the interval time between the day/night switch. You can set it
between 5 and 120 s.
The intensity of a camera's infrared LEDs is automatically adjusted
depending on an object's distance from the camera so that the infrared
does not overexpose the object.
When enabled, it can avoid over exposure when an object is close to the
camera.
Select On/OFF to enable/disable IR.
Enable: the IR LEDs will be On when the camera enters night mode.
Disable: the IR LEDs will be Off when the camera enters night mode
Note: The IR LEDs are always Off in Day mode.
This function improves image quality when the background illumination
is high. It prevents the object in the image from appearing too dark.
Options are: Off, Up, Down, Left, Right, and Center.
When enabled, this feature (wide dynamic range) allows you to see
details of objects in shadows or details of objects in bright areas of
frames that have high contrast between light and dark areas.
White balance (WB) tells the camera what the color white looks like.
Based on this information, the camera will then continue to display all
colors correctly even when the color temperature of the scene changes
such as from daylight to fluorescent lighting, for example. Select one of
the options:
AWB1: White balance is determined automatically.
MWB: Manually adjust the color temperature to meet your own
requirements.
Locked WB: Locks the WB to the current environment color
temperature.
Incandescent Lamp: For use with incandescent lighting.
Warm Light Lamp: For use where the indoor light is warm.
Natural Light: For use with natural light.
Fluorescent Lamp: For use where there are fluorescent lamps installed
near the camera.
Digital noise reduction (DNR) reduces noise, especially in low light
conditions, to improve image performance.
Options include: Normal Mode, Expert Mode, or Off.
Only available in Normal Mode. Set the level of noise reduction in
Normal Mode. A higher value has a stronger noise reduction. Default is
50.
Set the level of noise reduction level in Expert Mode.
Note: If you set a higher value, the image may not be clear.
21