Interlogix TruVision 360° Configuration Manual page 27

3. Recording schedule: Define the schedule during which motion detection can be
recorded. See "Defining a recording schedule" on page 30 for further information.
4. Linkage: Specify the method of response to the alarm.
To set up motion detection:
1. Click Configuration
2. Check the Enable Motion Detection
Check Enable Dynamic Analysis for motion
Note: Deselect the "Enable Motion Detection" option to disable the motion detection
alarm.
3. Click Draw Area. Click and drag the mouse on the live video image to draw an area
sensitive to motion detection.
Note: You can draw up to 8 motion detection areas on the same image.
4. Click Stop Drawing
restart drawing.
5. Move the Sensitivity
the same sensitivity level.
6. Click Edit to edit the arming schedule. See the picture below for the editing interface
of the arming schedule.
7. Choose the day and click
schedule to other days.
8. Click OK to save changes.
9. Specify the linkage method when an event occurs. Check one or more response
methods for the system when a motion detection alarm is triggered.
TruVision 360° Camera Configuration Manual
> Events > Motion
box.
to finish drawing. Click
slider to set the sensitivity of the detection. All areas will have
to set the detailed time period. You can copy the
Detection.
if you want to see motion real-time.
Clear All to delete all areas marked and
25