Tamper-Proof Alarms - Interlogix TruVision 360° Configuration Manual

Notify Alarm Recipient
Send Email
Upload Snapshot
Trigger Channel
10. Click Save to save changes.

Tamper-proof alarms

You can configure the camera to trigger an alarm when the lens is covered and to take
an alarm response action.
Figure 12: Tamper-proof menu
To set up tamper-proof alarms:
1. Click Configuration
2. Check the Enable Tamper-proof
3. Move the Sensitivity
4. Click Edit to edit the arming schedule for tamper-proof alarms. The arming schedule
configuration is the same as that for motion detection. See "To set up motion
detection" for more information.
5. Check the checkbox to select the linkage method taken for the tamper-proof.
6. Click Save to save changes.
26
Send an exception or alarm signal to remote management
software when an event occurs.
Sends an email to a specified address when there is a
motion detection alarm.
Capture the image when an alarm is triggered and upload
the picture to NAS or FTP server.
Triggers the recording to start in the camera.
> Events > Tamper-proof.
box.
slider to set the sensitivity of the detection.
TruVision 360° Camera Configuration Manual