Configuring The Video Image - Interlogix TruVision 360° Configuration Manual

Parameter Description
I Frame Interval: A video compression method. It is strongly recommended
not to change the default value, 50.
2. Audio Audio Encoding: G.711ulaw, G.711alaw, MP2L2 and G.726 are optional.
Audio Input: Only "MicIn" is selectable for the built-in microphone.
Input Volume: Specifies the volume from 0 to 100.
2. ROI Enable to assigns more encoding resource to the region of interest to
increase the quality of the ROI whereas the background information is less
focused.
To set up ROI parameters:
1. Click Configuration
2. Select the channel from the drop-down list.
3. Draw the region of interest on the image. Up to four regions can be drawn.
4. Choose the stream type to set the ROI encoding.
5. Enable Fixed Region
Region No.: Select the region.
ROI Level: Choose the Image Quality Enhancing level.
Region Name: Set the region name you want.
6. Click Save to save changes.

Configuring the video image

You may need to adjust the camera image depending on the camera model or location
background in order to get the best image quality. You can adjust the brightness,
contrast, saturation, hue, and sharpness of the video image.
Use this menu to also adjust camera behavior parameters such as exposure time, iris
mode, video standard, day/night mode, image flip, WDR, digital noise reduction, and
white balance. See Figure 8 on page 20 for more information.
TruVision 360° Camera Configuration Manual
> Video/Audio > ROI.
to manually configure the area.
19