General menu 9 AE/WDR/BLC menu 9 WB mode menu 10 D/N mode menu 11 Motion alarm menu 12 Privacy menu 12 Picture adjustment menu 13 Reset camera 14 Specifications 14 Dimensions 14 Menu Map 15 UltraView UVC-6120-1 Digital WDR Camera User Manual...
Always use a 12 VDC or 24 VAC UL listed Class 2 power supply to power the camera. • Do not use the camera over the temperature range specifications: -10°C to +50°C (14°F to 122°F) UltraView UVC-6120-1 Digital WDR Camera User Manual...
5. 12 VDC / 24 VAC dual power 3. OSD control pad Figure 2: Camera UVC-6120-1-P2 1. Video output 4. D/N trigger pin 2. Audio output 5. AC96V/AC240 universal power 3. OSD control pad UltraView UVC-6120-1 Digital WDR Camera User Manual...
Moves the cursor downward to select an item. Enter Press the center of the control pad to display the Main menu. If the selected item has its own menu, press the pad to enter a submenu. UltraView UVC-6120-1 Digital WDR Camera User Manual...
Attach the lens Refer to the instructions that came with the lens you purchased for complete installation instructions of that lens. Note: For optimal performance, use an auto iris lens. UltraView UVC-6120-1 Digital WDR Camera User Manual...
4. Supply power to the unit by plugging the power supply into a proper source. Note: The power LED illuminates to show that the camera is receiving power. If it does not illuminate, check the terminal block connections and the power source. UltraView UVC-6120-1 Digital WDR Camera User Manual...
Page 9
For UVC-6120-1-P2 Connect the power cable of a high voltage camera to either a 230 VAC or a 120 VAC power supply outlet. UltraView UVC-6120-1 Digital WDR Camera User Manual...
4. When in a sub menu, select Return to return to the previous menu. 5. To exit the Main menu, move the cursor to Exit at the bottom of the screen and press Enter. All changes are saved. UltraView UVC-6120-1 Digital WDR Camera User Manual...
Figure 6: The AE/WDR/BLC menu Table 4: AE/WDR/BLC menu Menu item Description Lens type Defines the lens type used with the camera. Select Fixed or DC. If DC is enabled, select the DC level and shutter speed UltraView UVC-6120-1 Digital WDR Camera User Manual...
It can be used for both indoor and outdoor locations. Manual Manually fix the white balance by adjusting the blue and red gain parameters. Only use this function when there is steady light. Values can be adjusted between -5 and +5. UltraView UVC-6120-1 Digital WDR Camera User Manual...
Manually select Night mode only. The camera can only be in Night mode. Externally triggered D/N switch. Return Press Enter to return to the previous menu. Exit & Save Exits the menu and returns to live mode. Saves changes made. UltraView UVC-6120-1 Digital WDR Camera User Manual...
The masking appears as a blank colored area on screen. You can create up to 4 privacy masks. Select the Privacy option from the Main menu to enter the Privacy menu. UltraView UVC-6120-1 Digital WDR Camera User Manual...
Set the camera image characteristics such as brightness, contrast, sharpness, hue, and saturation (called “Gain” here) of the picture. Their values can be set between 0 and 10. Select the Pict Adjust option from the Main menu to enter the Picture menu. UltraView UVC-6120-1 Digital WDR Camera User Manual...
Power consumption Max. 3.6 W Max. 4.8 W Operating temperature -10 to +50 °C (14 to 122 °F) Weight 390 g (0.85 lb.) Dimensions (Units = mm) Side view : Front view : UltraView UVC-6120-1 Digital WDR Camera User Manual...