Lp Conversion Instructions - Travis Industries 864 HO NB Installation Manual

42

LP Conversion Instructions

Convert the appliance prior to installing the gas line to ensure proper gas use.
1. Access the firebox.
2. Remove and discard the manifold cover (see below).
3. Follow the directions below to replace the orifices.
1/2" Wrench
© Travis Industries
Installation
Rear Burner Orifice
Front Burner Orifice
Use a 1/2" open end wrench
a
to unscrew the two orifices.
c
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
15/16"
24mm
(for qualified installers only)
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
Front
Rear
4120327
b
NG LP
#48 1.25mm
#39 .0625"
100-01290_000