Travis Industries 864 HO NB Installation Manual page 50
Direct vent fireplace
Hide thumbs
Also See for 864 HO NB:
- Installation manual (64 pages) ,
- Installation instructions manual (13 pages) ,
- Owner's manual (26 pages)
Table of Contents
Advertisement
50
Optional Equipment
3
Unplug the ac adapter from the power harness (see Figure 4). You can leave the ac adapter
plugged into the wiring harness.
4
Disconnect the molex connector leading to the gas control valve (see Figure 5).
WARNING: The tabs on the gas control valve are fragile. Take care when removing the molex
connector to not pull or damage the wires or tabs.
5
Disconnect the two leads on the back of the control panel for the IPI / CPI switch (continuous pilot
/ greensmart pilot – see Figure 6).
© Travis Industries
(for qualified installers only)
4120327
Figure 4
Figure 5
Figure 6
100-01290_000
Advertisement
Table of Contents
