Installation
4. Install the new manifold cover included in the LP conversion kit (see illustration below).
5. Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice.
Lift the pilot hood
a
off the pilot
assembly.
6. Replace the burner. Push the burner to the right side to insure the manifold inserts over the
orifices.
© Travis Industries
(for qualified installers only)
Remove the orifice and replace with the LP orifice. Screw the
c
orifice all the way in and replace the pilot hood.
Use a hex wrench to
b
unscrew the orifice.
5/32" Hex
NOTE: when re-attaching,
this pin lines up with the
notch in the pilot hood.
4120327
43
Orifice Identification:
LP (Propane) Orifice
35
35
NG (Natural Gas) Orifice
62
100-01290_000