Optional Faceplates - Sizing Chart; Special Instructions For Metropolitan And Victorian Lace Faces; Special Instructions For Wilmington Faces - Travis Industries 864 HO NB Installation Manual

Optional Faceplates – Sizing Chart
Name
FPX Faces
Avalon Faces
Lopi Faces
Bungalow & Tree of Life Faces
Rosario Face

Special Instructions for Metropolitan and Victorian Lace Faces

The above faces require the outer grill deflectors to be removed. See the instructions below.

Special Instructions for Wilmington Faces

The above faces require the outer grill deflectors to be removed to allow for installation of the face
mounting brackets. Once the brackets are installed, replace the deflectors. See the instructions below.
© Travis Industries
Installation
(for qualified installers only)
Height Width
35-3/4" (908mm) 41" (1041mm)
34-1/8" (867mm) 36-7/8" (937mm)
35-3/4" (908mm) 41" (1041mm)
34" (864mm) 36-7/8" (937mm)
38" (965mm) 42" (1067mm)
Notes
Arch Faces have a 45-3/4" (1162mm) Radius – May fit
over top of tile facing
Optional facing will butt to edge of faceplate (tile line)
May fit over top of tile facing
Optional facing will butt to edge of faceplate (tile line)
Remove the outer deflector on both sides
(use needle-nose pliers if necessary).
These tabs bend down
to allow for removal.
Re-attach the deflectors to the top louver
for future use if using a different face or
grill. Bend the tabs as shown, making
sure the deflectors are secure and flat.
Remove the outer deflector on both sides
(use needle-nose pliers if necessary).
These tabs bend down
to allow for removal.
Re-attach the deflectors once the
mounting brackets are in place. Bend the
tabs down, making sure the deflectors are
secure and flat.
4120327
29
100-01290_000