54
Optional Equipment
15
Place the fan controller near the front of the fireplace to the left and connect it to the wiring
harness (see Figure 22). Attach the power cord from the fan controller to the AC connection (see
Figure 23). MAKE SURE TO TURN THE FAN CONTROLLER ON ("-" SYMBOL).
16
Disconnect the power lead from accent light and connect it to the power lead included with this kit
(see Figure 24). Attach the power lead to the fan controller in the "AUX OUT" receptacle (see
Figure 25).
NOTE: If using the optional fan, you will want to disconnect its power lead and connect it to
the extra power lead included with this kit, then connect it to the "FAN" receptacle on
the fan controller.
© Travis Industries
(for qualified installers only)
Figure 22
Figure 24
4120327
Figure 23
Figure 25
100-01290_000