Size And Position Page - Extron electronics IN1604 DTP User Manual

Size and Position Page

The Size and Position page provides three methods of adjusting image output size and
position: graphically, numerically, or automatically with Auto-Image. Click the
Position
Size and Position page.
Figure 49.
To adjust the size and position graphically:
If desired, click the
proportions of the output image. With this selected, the horizontal or vertical dimension of
the output will change relative to the change of the other dimension.
1. Click and drag the drag points of the sample image (
designated space (defined by the black area in figure 49).
2. Click anywhere inside the sample image (see the blue rectangle with a circle inside in
figure 50) and drag it anywhere within the designated space to reposition the image.
To adjust the size and position numerically:
1. Enter a value or click the
Vertical Size
2.
Enter a value or click the
Vertical Position
To adjust the size and position automatically:
To automatically adjust these settings, perform one of the following (see
page 18 for more details on Auto-Image settings):
• Click the
• Click the
the entire video output (ignores aspect ratio settings).
Click the
•
maintain the aspect ratio of the input signal (ignores aspect ratio settings).
icon (see figure 38, on page 58) on the Global Navigation Bar to open the
4
Size and Position Page
Lock Aspect Ratio
or
Up Down
fields ( ).
3
or
Up Down
fields ( ).
3
button ( ) to perform a one-time Auto-Image.
Auto-Image 4
button (
Auto-Image & Fill
Auto-Image & Follow
IN1604 DTP and IN1604 HD Scalers • Configuration Software
check box (see figure 49,
) to resize the image within the
2
arrow in the
Horizontal Size
arrow in the
Horizontal Position
) to perform a one-time Auto-Image and fill
5
button ( ) to perform a one-time Auto-Image and to
6
Size and
) to constrain the
1
and
and
Auto-Image on
67