Error Responses; Sis Overview; Using The Command And Response Tables; Symbol Definitions - Extron electronics IN1604 DTP User Manual

Error Responses

When the scaler receives a valid command, it executes the command and sends a
response to the host device. If the unit is unable to execute the command, it returns an error
response tot he host.
E01
E06
E10
E11
E12

SIS Overview

Using the Command and Response Tables

The
the commands that the scaler recognizes as valid, the responses that are returned to the
host, a description of the command function or the results of executing the command, and
examples of commands in ASCII (Telnet) and URL encoded (Web).
NOTE: Upper and lower case text can be used interchangeably unless otherwise
Space
Figure 19.

Symbol Definitions

— Invalid input number
— Invalid switch attempt in this mode
— Invalid command
— Invalid preset number
— Invalid port number
Command and Response Tables
stated.
ASCII to Hex Conversion Table
ASCII to Hexadecimal Character Conversion Table
= Space
•
= Carriage return with line feed
]
= Carriage return with no line feed
}
| = Pipe (can be used interchangeably with the
= Escape
E
W = Can be used interchangeably with the
X! = Input selection
IN1604 DTP and IN1604 HD Scalers • SIS Configuration and Control
— Invalid parameter
E13
— Not valid for this configuration
E14
— Invalid command for signal type
E17
— Busy
E22
for SIS commands beginning on page 33 lists
•
}
character)
E
character
= configurable VGA
1
= HDMI/DVI 1
2
3 = HDMI/DVI 2
= HDMI/DVI 3
4
28