Internal Web Page; Accessing The Web Page - Extron electronics SW HD 4K PLUS Series User Manual

Internal Web Page

This section provides procedures for accessing and using the SW HD 4K PLUS series
internal web page. Topics in this section include:
•
•
The internal web page displays information about the device and provides basic
configuration options. For more detailed configuration options, use SIS commands or the
Extron Configuration Product Configuration software (PCS) (see
and

Accessing the Web Page

To access the internal web page:
1.
2.
3.
4.
5.
6.
Accessing the Web Page
Web Page Overview
Control, beginning on page 18, or the PCS help file).
Connect the switcher to a LAN or WAN using the rear panel LAN connector (see
LAN (Ethernet) connector
F
NOTE: If the Ethernet connection to the switcher is unstable, try turning off the
proxy server in the web browser.
On a connected PC, open a web browser.
NOTE: The internal web page does not support compatibility mode in Microsoft
Internet Explorer .
®
Enter the IP address of the device in the browser
NOTE: The default IP address is 192.168.254.254.
Press the <Enter> key on the keyboard.
The switcher checks if the device is password-protected and performs one of the
following:
• If the device is not password-protected, the web page opens.
If the device is password-protected, enter a user name (user or admin) in the
•
field and the password in the
Name
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of an absolute system reset, the
passwords convert to the default, which is no password.
Click the button.
OK
on page 6).
field.
Address
field when prompted.
Password
SW HD 4K PLUS Series • Internal Web Page
Remote Configuration
User
38