Internal Web Page; Accessing The Web Page - Extron electronics DTP2 T 204 User Manual

Internal Web Page

This section provides procedures for accessing and using the DTP2 T 204 internal web
page. Topics in this section include:
•
•
The internal web page displays information about the DTP2 T 204 and provides
basic configuration options. For more detailed configuration, use SIS commands
(see
DTP2 T 204 PCS Help File).

Accessing the Web Page

To access the internal web page:
1.
2.
3.
4.
5.
Accessing the Web Page
Web Page Overview
Remote Configuration and Control
Connect the switcher to a LAN or WAN using the rear panel LAN connector (see
(Ethernet) connector
on page 9).
NOTE: If the Ethernet connection to the switcher is unstable, try turning off the
proxy server in the web browser.
On a connected PC, open a web browser.
NOTE: The internal web page does not support compatibility mode in Microsoft
Internet Explorer .
®
Enter the IP address of the device in the browser
NOTE: The default IP address is 192.168.254.254.
Press the < > key on the keyboard. The switcher checks if the device is password-
Enter
protected and performs one of the following:
• If the device is not password-protected, the web page opens.
• If the device is password-protected, enter a user name (
Name field and the password in the Password field when prompted.
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron.
Click the OK button.
starting on page 24), or PCS (see the
field.
Address
user
DTP2 T 204 Switcher • Internal Web Page
LAN
or ) in the User
admin
51