Av Controls Panel - Extron electronics IN1604 DTP User Manual

AV Controls Panel

The AV controls panel is used to control AV settings such as input selection, one-time
Auto-Image to an input, video and audio mute, and image freeze.
The panel also displays input and output information.
Figure 37.
AV Inputs buttons
Click an
AV Inputs
Input section displays information about the current input.
NOTE: The signal indicators on the AV input buttons display green when a signal is
present on the corresponding input or gray when there is no signal present.
Auto-Image button
Click the
Auto-Image
input.
Freeze button
Click the
Freeze
Mute buttons
• Click the
when enabled.
Click the
•
enabled.
• Click the
button turns red along with the Video Mute and Audio Mute buttons when enabled.
• Click the
along with the Video Mute button when enabled.
To unmute any signal, click the appropriate button. The button reverts to the default color,
indicating the signal has been unmuted.
AV Controls Panel
button ( ) to select an input. As a new input is selected, the Active
1
button ( ) to start a one-time Auto-Image on the currently selected
2
button ( ) to freeze the input. The button turns blue.
3
button ( ) to globally mute only the audio. The button turns red
4
Audio Mute
button ( ) to mute only the video. The button turns red when
Video Mute 5
button ( ) to mute both the video and audio simultaneously. The
AV Mute 6
button ( ) to mute the video and sync. The button turns red
Sync Mute 7
IN1604 DTP and IN1604 HD Scalers • Configuration Software 57