Table of Contents
Advertisement
Remote powering of a DTP receiver (IN1604 DTP only) — Provides power to
•
a remote DTP receiver over the twisted pair connection, eliminating the need for a
separate power supply at the remote unit.
•
DTP 230 and DTP 330 compatibility (IN1604 DTP only) — Enables mixing and
matching with desktop and wallplate receivers, as well as other DTP-enabled products
to meet application requirements.
•
HDBaseT compatibility (IN1604 DTP only) — Allows the TP output to be configured
to send video and embedded audio, plus bidirectional RS-232 and IR signals to an
HDBaseT-enabled display.
NOTE: When configured for HDBaseT mode, "Over DTP" analog audio and remote
power capabilities are disabled.
Key Minder — Authenticates and maintains continuous HDCP encryption between
•
input and output devices to ensure quick and reliable switching in professional AV
environments, while enabling simultaneous distribution of a single source signal to one
or more displays.
•
Advanced scaling engine — Scales inputs to a common high resolution output with
30-bit processing and 1080i deinterlacing.
•
EDID Minder — Ensures that all sources power up properly and reliably output content
for display.
SpeedSwitch Technology — Provides high-speed switching for HDCP-encrypted
•
content.
Aspect ratio control — Controls the aspect ratio by selecting a Fill mode, which
•
provides a full screen output, or a Follow mode, which preserves the original aspect
ratio of the input signal.
Image freeze control — Freezes a live image.
•
•
Automatic input cable equalization — Actively conditions incoming HDMI signals
to compensate for signal loss when using long cables, low quality cables, or source
devices with poor signal output.
•
Auto-Image — Automatically optimizes the image by analyzing and adjusting to the
video input signal.
•
Auto Input Memory — Automatically stores size, position, and picture settings based
on the incoming signal. When the same signal is detected again, these image settings
are automatically recalled from memory.
•
On-screen menus — Allows for easy system setup using the front panel controls.
Key parameters such as input and output video formats and resolutions are grouped
on the initial Quick Setup screen, while additional screens provide full control over other
functions and settings.
Output Standby Mode — Mutes video and sync output to the display device when
•
no active input signal is detected. This allows the projector or flat-panel display to
automatically enter into standby mode to save energy and enhance lamp or panel life.
Power Save Mode — Places the scaler in a low power standby state to conserve
•
energy when not in use.
•
Picture controls — Includes controls for brightness, contrast, color, tint, detail,
horizontal and vertical positioning, and sizing.
•
Automatic 3:2 and 2:2 pulldown detection — Helps maximize image detail and
sharpness for NTSC, PAL, and HDTV 1080i sources that originated from film.
IN1604 DTP and IN1604 HD Scalers • Introduction
4
- Quick Links:
- Powering up
Hide quick links:
Advertisement
Table of Contents
