Nikon ECLIPSE TE2000-E Instructions Manual page 12

I. Parts of the microscope and their names
Note: Be sure to cover unused ports with provided caps to prevent the entry of external light and dust.
Eyepiece-tube clamp screw
Observation port
Install the eyepiece tube.
Optical path switch-over dial
EYE: Observation 100%
SIDE: Observation 20%, Left 80%
Objective
Nosepiece
Mount for analyzer
Install the analyzer here
for DIC microscopy.
Adapter clamp screw
Left-side port
Coarse focus torque adjustment ring
Forward turn: Decreases torque
Backward turn: Increases torque
10
TE2000-S, right side
TE2000-S, left side
Fine focus knob
Coarse focus knob
Stage
Black cover for elevating section
Remove the cover
when installing the epi-fl attachment.
Mount for cassette holder
For the installation of the cassette holder
for epi-fl microscopy
Dia-illumination ON/OFF switch
Brightness adjustment dial
This dial is disabled
when the remote control pad is used
for bright adjustment.
Fine focus knob
Coarse focus knob