Nikon ECLIPSE TE2000-E Instructions Manual page 11

Note: Be sure to cover unused ports with supplied caps to prevent the entry of external light and dust.
Eyepiece-tube clamp screw
Observation port
Install the eyepiece tube.
Front port
Photo-mask dial
Clockwise turn: OUT
Counterclockwise turn: IN
Intermediate magnification dial
1X: No intermediate magnification
1.5X: 1.5X intermediate magnification for all ports
Optical path switch-over dial
1: Observation 100%
2: Observation 20%, Right 80%
3: Not used (Bottom port 100%)
4: Observation 20%, Front 80%
5: Left 100%
Objective
Nosepiece
Mount for analyzer
Install the analyzer here
for DIC microscopy.
Adapter clamp screw
Left-side port
Coarse focus torque adjustment ring
Forward turn: Decreases torque
Backward turn: Increases torque
The bottom port changeover lever is provided on the left-hand side of the TE2000-U bottom port type.
See P. 41 for optical path switching.
I. Parts of the microscope and their names
TE2000-U, right side
TE2000-U, left side
Adapter clamp screw
Right-side port
Fine focus knob
Coarse focus knob
Objective refocusing ring
Forward turn: Release
Backward turn: Lock
Stage
Black cover for elevating section
Remove the cover when installing
the epi-fl attachment.
Mount for cassette holder
For the installation of the cassette holder
for epi-fl microscopy
Dia-illumination ON/OFF switch
Brightness adjustment dial
This dial is disabled
when the remote control pad is used
for bright adjustment.
Fine focus knob
Coarse focus knob
9