Measurement In Auscultation Mode - Omron HBP-1100 Instruction Manual

Measurement in auscultation mode

In auscultation mode, this monitor does not measure blood
pressure.Measurement should be performed by a health care
professional using a stethoscope.
The healthcare professional uses a stethoscope to determine SYS
and DIA by means of the auscultation method.
1. Make sure the power is on.
"0" is displayed.
2. Press the [Auscultation] button.
The auscultation icon appears and the
monitor enters auscultation mode.
3. Press the [START/STOP] button.
In ation starts. When the cuff is
suf ciently in ated, de ation
automatically starts.
4. At the SYS point that you determine by auscultation, press the
[Auscultation] button.
The rst time you press the [Auscultation] button, the SYS value
appears.
5. At the DIA point that you determine by auscultation, press the
[Auscultation] button.
The second time you press the [Auscultation] button, the DIA value
appears and the cuff rapidly de ates.
Manual in ation in auscultation mode
If the cuff is not in ated suf ciently or you want to re-in ate, you can
in ate the cuff manually.
Hold down the [START/STOP] button during in ation or de ation to
in ate continuously.
"-" appears below the value to indicate that manual in ation is in
progress.
20