Non-Invasive Blood Pressure (Nibp) Measurement; Measurement In Normal Mode - Omron HBP-1100 Instruction Manual

Non-Invasive Blood Pressure (NIBP) Measurement

Measurement in normal mode

1. Press the [START/STOP] button.
Blood pressure measurement is performed once.
2. The measurement results are displayed.
If a measurement value is outside the corresponding range below, the
value will ash.
SYS: 59 mmHg or less, or 251 mmHg or higher.
DIA: 39 mmHg or less, or 201 mmHg or higher.
PULSE: 39 bpm or less, or 201 bpm or higher.
Normal measurement
Manual in ation in normal mode
If the cuff is not suf ciently in ated, it can be in ated manually.
During in ation, hold down the [START/STOP] button to in ate
continuously.
"-" appears below the value to indicate that manual in ation is in
progress.
18
Measurement error / failure