Start-Up Display; Initial Setting (Display Language); Initial Setting (Projector Setup) - Panasonic PT-VW345NZ Operating Instructions Manual

Start-up display

When the projector is switched on for the first time after purchase as well as when [INITIALIZE ALL] is executed in the
[PROJECTOR SETUP] menu, then the initial setting screen is displayed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.

Initial setting (display language)

Select the language to show on the screen.
1) Press asqw to select the display language.
2) Press the <ENTER> button to proceed to the initial setting.

Initial setting (projector setup)

Set each item.
1) Press as to select an item.
2) Press qw to switch the setting.
f [PROJECTION METHOD] (
f [SCREEN FORMAT] (Only for PT-VW345NZ
f [SCREEN POSITION] (Only for PT-VW345NZ
f [HIGH ALTITUDE MODE] (
3) Press the <ENTER> button.
f Confirm the setting value and complete the initial setting.
Note
f If you press the <RETURN> button in the initial setting (projector setup) screen, you can go back to the initial setting (display
language) screen.
f To continue operations after completed the initial settings, refer to "Selecting the input signal" (
24 - ENGLISH
Chapter 1 Preparation - Start-up display
PT-VW345NZ
Æ
page 75)
Æ page 70)
Æ
Æ
page 75)
PT-VX415NZ
page 70)
Æ page 44).