[Network/Usb] Menu; Confirmation Of The Network Information; [Wired Lan] - Panasonic PT-VW345NZ Operating Instructions Manual

[NETWORK/USB] menu

On the menu screen, select [NETWORK/USB] from the main menu, and select an item from the submenu.
Refer to "Navigating through the menu" (
fAfter selecting the item, press asqw to set.

Confirmation of the network information

When connecting the "Wireless Manager ME6.0", the dedicated application of iPad/iPhone/iPod touch/Android,
or the Miracast-certified device to a projector, the information such as Network number of Wireless LAN,
Projector name and ID are required. You can confirm the information in the input guide (as the following picture)
Æ
or the network status (

[WIRED LAN]

You can make detailed wired LAN settings.
1) Press as to select [WIRED LAN].
2) Press the <ENTER> button.
f The [WIRED DETAILED SETUP] screen is displayed.
3) Press as to select an item, and change the setting according to the instructions.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
Chapter 4 Settings - [NETWORK/USB] menu
Æ
page 54) for the operation of the menu screen.
page 91).
[DETAILED] input guide
Projector name
Network number of Wireless LAN
[ON]: If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[OFF]: If a DHCP server does not exist in the network to which the projector is
connected, additionally set [IP ADDRESS], [SUBNET MASK] and
[DEFAULT GATEWAY].
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Enter the DNS server address if DHCP server is not used.
Enter the alternate DNS server address if DHCP server is not used.
ID
ENGLISH - 85